Canon LBP251 User Manual Download Page 277

Page: 277 / 495

You can check the status of documents or the machine, and you can also change some of the settings. If

you wish to delete your print documents, enter the user name of the documents in [User Name]. The user

name is automatically set to print documents based on information such as your computer name or

computer logon name.

[Remote UI Access PIN]

If [Remote UI Access PIN] is displayed, enter the PIN ( Setting a Remote UI PIN(P. 216) ).

When the Department ID Management is enabled

Enter the appropriate ID in [Department ID] and PIN in [PIN] ( Setting the Department ID

Management(P. 209) ).

Click [Log In].

●

Portal Page (main page) will be displayed. Remote UI Screens(P. 272)

Using Remote UI

271

Summary of Contents for LBP251
















































































































































































































































































































































































































































































































Search results

Summary of Contents for LBP251

Reviews:

Brands by name

Popular brands

Canon LBP251, User Manual

Search results

Summary of Contents for LBP251

Reviews:

Brands by name

Popular brands