Canon LBP 2460 - B/W Laser Printer, Service Manual

Page: 38 / 314

· ERROR indicator: 1
On:
An error has occurred and printing has stopped. Check the display for a message describing
the problem.
Off:
Operation is normal and there is no error.
· POWER indicator: 2
On:
The printer is ready to print.
Flashing:
The printer is warming up. Wait until the light stays on before you start printing operations.
Off:
The printer cannot print.
· CONTINUE indicator: 3
On:
Indicates the CONTINUE button may be pressed to exit current condition. For instance, if the
message TONER LOW appears in the display panel, press CONTINUE to continue printing
but be sure to change the toner as soon as possible.
Off:
Operation is normal.
· Status indication display: 4
The two-line, 20-digit display tells you what is happening inside the printer and shows you
the menus and settings which can be changed. The display keeps you informed about the
printer's operation status, lets you make menu selections, warns you about problems and
identifies errors.
· FORM FEED key: 5
Performs a FORM FEED and prints data remaining in the FORM printer. If the FORM
FEED indicator is on, data remains in the printer (only with PCL). Press ON LINE to take the
printer off-line. Press FORM FEED to print the remaining data.
· RESET key: 6
Accesses the RESET menu so you can select RESET PRINTER or RESET MENU. If you
choose RESET PRINTER all resources in the memory (soft fonts, macros, stored page data,
and so on) are erased, but the menu items selected are unaffected. If you choose RESET
MENU the factory default values are restored for most menu items.
· DISK indicator: 7
On:
The disk is being accessed (for fonts, etc.).
Off:
The disk is not being accessed.
· STAPLE indicator: 8
On:
Stapling has been selected for the current print job.
Off:
Stapling has not been selected.
CHAPTER 1
1 - 26