manualshive.com logo in svg

Canon LBP-2000, User Manual, Page: 246 / 263

Share
Download
Canon LBP-2000 User Manual Download Page 246

Glossary

10-51

Appendix

10

Graphic Set

The rule that defines the correspondence between the host computer and the printer, 
and determines the arrangement of characters in the character code table.

Handshake

A communication signal between the host computer and the printer. Before the host 
computer sends data to the printer, the computer sends a signal to the printer that 
asks if the printer is ready to receive the data. When the printer is ready, it sends a 
signal that it is ready to receive. After the data transmission is completed, signals to 
confirm the successful completion of the transfer are sent between the host computer 
and the printer. This form of communication is called a handshake.

Host Computer

The computer connected to a printer and used to drive the printer when it is on-line.

Initialize

Returning the printer to its factory set values. These are the initial values programmed 
into the printer’s memory before shipping from the factory. The printing environment 
settings change the power-on defaults. When you initialize the printer, you erase all 
power-on defaults and restore the printer to its factory defaults.

Interface

The connection between two devices, such as your printer and host computer, that 
allows them to communicate. Your printer has a parallel and a USB interface.

Interface Cable

A cable used to connect your printer and host computer. This is also referred to as a 
printer cable. You must use a parallel cable for the parallel interface or a USB cable for 
the USB interface.

ISO

Stands for International Organization for Standardization (or International Standards 
Organization) which has standardized codes for information exchange.

Job

The collection of data that goes into printing. A job begins with a start command at the 
beginning of the first page of a document and ends with an end command on the last 
page. Once a job has started, no other job can be executed until it is complete.

Job Timeout

A feature that terminates a job if nothing is received by the printer for a specified 
length of time. For example, if a job is suspended before it is completed and the 
printer does not receive the printer end command, the printer will terminate the job 
automatically to free the printer for the next job.

Summary of Contents for LBP-2000








































































































































































































































































Reviews:

No comments