manualshive.com logo in svg

Canon LBP-2000, User Manual, Page: 186 / 263

Share
Download
Canon LBP-2000 User Manual Download Page 186

Responding to Error Codes and Messages

9-18

T

roub

leshooting

9

Responding to Error Codes and Messages

If printing is disabled during a print job for some reason, a buzzer will sound, the 
alarm indicator will light up and an error code(s) will appear on the display. In 
addition, for any phenomenon that does not affect printing function of the printer but 
requires some measure to be taken, a warning message will appear on the display. 
When any of these messages appear on the display, follow one of the remedies 
listed to respond to the message.

NOTE

•

When two or more problems that are indicated by warning messages occur 
simultaneously, the corresponding messages will appear alternately.

•

When two or more error messages appear on the display simultaneously, warning 
messages will not appear there.

•

For messages attached with <Error Skip>, the printer will be able to continue printing by 
“skipping errors” when you press [Go]. It should be remembered, however, that some 
pieces of print data may be omitted or may not be printed correctly. If you want to stop the 
procedure, perform software reset and remove the cause. Then press [Go] to start 
printing again.

FLASH OVERFLOW

Cause1

: A memory overflow has occurred in the optional Flash ROM.

Remedy

: Format the Flash ROM or delete font and macro data to create more space. 

Cause2

: The printer has received more font and macro data than it can hold in the 

available memory of the Flash ROM. The printer goes off-line.

Remedy

: Press [Go] to bring the printer back on-line.

FLASH ERROR

Cause

: An error has occurred when trying to format, or read or write data to the optional 

Flash ROM.

Remedy

: Replace the Flash ROM.

Summary of Contents for LBP-2000








































































































































































































































































Reviews:

No comments