Canon Laser Shot LBP5970, User Manual

Page: 424 / 550

7-29
Tr
oub
leshooting
7
Message List
IMPORTANT
When you continue printing by pressing [Online], be aware that the data of macro that is
already registered may be deleted.
Remedy 2 Perform a soft reset in the RESET menu, increase the free space of RAM using
the following procedure, and then print again.
- Perform a hard reset or cycle the power of the printer (Be aware that all the
data in the memory that the printer has received will be deleted).
- If you are using UFR II Printer Driver, install an optional expansion RAM
module. However, the problem may not be solved even after the expansion
RAM module is installed.
<35 PDF SIZE ERR> <Auto Error Skip>
Cause There is not sufficient free space to print the PDF file using the direct print
function.
Remedy Press [Online] to cancel the job. Afterward, perform the following processes
(decreasing the size of the PDF file), and then print again.
- Optimizing the PDF file
- Dividing the PDF file into multiple files
<35 TABLE FULL> <Auto Error Skip>
Cause The number of the documents in a job has exceeded 16.
Remedy The printer continues printing by pressing [Online]. However, the job with which
an error has occurred is not printed.
<36 DIS.LIST FULL> <Auto Error Skip>
Cause The memory required for processing has run out and overflowed.
Remedy 1 Press [Online] to continue printing. However, the job with which an error has
occurred is not printed.
Remedy 2 Perform a soft reset in the RESET menu, increase the free space of RAM using
the following procedures, and then print again.
- Perform a hard reset or cycle the power of the printer (Be aware that all the
data in the memory that the printer has received will be deleted).
- Install an optional expansion RAM module (256 MB or more*). (See Getting
Started Guide)
* However, even if a 512-MB expansion RAM module is installed, the free space to be increased is
the same as when a 256-MB expansion RAM module is installed.