18
● Thick paper
Paper which is 106-128 g/m
2
can be used with this printer. Always load paper of this thickness
into the paper tray.
● When printing with thick paper, always set [用紙タイプ] in the printer driver
’
s
[給紙] sheet (or [デフォルト用紙タイプ] in the set-up menu if you are using
an OS which cannot run a Windows printer driver) to [厚紙].
● Transparencies
It can be difficult to separate transparencies from each other. Pick them up one at a time and by
all four sides, and then load them into the paper tray.
● When printing on transparencies, always set [用紙タイプ] in the printer
driver
’
s [給紙] sheet (or [デフォルト用紙タイプ] in the set-up menu if you
are using an OS which cannot run a Windows printer driver) to [OHP].
● When printing face up on transparencies, remove the transparencies one at
a time as they come out.
● Label sheet
Check that the label sheet is face up when you load it into the paper tray.
● Do not use the following types of label sheet. There is a risk of severe jamming
and damage to the inside of the printer.
・ Label sheet with some adhesive surfaces exposed
・ Label sheet with some parts of the lower surface exposed on the upper
surface
・ Label sheet with labels that peel off easily
● When feeding label sheet sideways, remove each sheet by hand one at a
time. The first sheets printed out might curl.
● Duplex printing with a duplex unit
● If both a 500-sheet paper feeder and a duplex unit are installed, you cannot
duplex print with the duplex unit on user paper loaded in a 500-sheet paper
cassette.
