manualshive.com logo in svg

Canon LASER SHOT LBP-1210, User Manual

Share
Download
Canon LASER SHOT LBP-1210 User Manual Download Page 74

Using the Canon 

Advanced Printing 

Technology

Chapter 3

Using the Canon Advanced Printing Technology

57

14. If you opted to print a test page, the page prints after installation 

completes, and the following dialog appears. If the page printed 
correctly, click 

OK

.

Connecting to the LBP-1210 Already on Your Network

If the LBP-1210 is already on your network, you can install it two 
different ways. The easiest way is using automatic network download. If 
network download is not available, you can use the 

Add Printer Wizard

.

Network Download

Windows 95/98/Me and Windows NT 4.0/2000/XP clients can download 
the drivers for the LBP-1210 automatically.

1.

Open Explorer and browse the network until you can see the 

Canon LASER SHOT LBP-1210

 printer icon.

2.

Double-click the printer icon, or drag the printer icon to your 

Printers

 folder.

3.

Follow the instructions on screen.

❏

  Service Pack 4 or later must be installed on Windows NT servers in 

order for Windows 95/98/Me clients to use network download.

❏

  Windows NT 4.0/2000/XP clients cannot download the driver from 

Windows 95/98/Me servers.

Summary of Contents for LASER SHOT LBP-1210



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands