manualshive.com logo in svg

Canon LASER SHOT LBP-1210, User Manual

Share
Download
Canon LASER SHOT LBP-1210 User Manual Download Page 55

38

Using the Canon Advanced Printing Technology

Chapter 3

Windows XP Plug and Play

Following is the installation procedure of plug and play for “Using USB 
and Parallel Port” under Windows XP.

Before you install the software, make sure you do the following:

❏

Connect the printer to your computer (For details, see the 

Getting 

Started Guide

).

❏

Turn on the printer (For details, see the 

Getting Started Guide

).

❏

Start up Windows XP.

Using USB Port (USB Cable)

In order to use the printer via USB, the following requirements need to be 
satisfied.

❏

Your computer must be equipped with a USB port and it is necessary 
that its operation is approved by the manufacturer.

❏

Windows NT 4.0 is not available for USB.

When using parallel port, go to 

Step 2

.

1.

Plug and Play

 is being carried out and the USB class driver, “USB 

Printing Support” is automatically detected and installed.

2.

Log on as member of Administrators. The full control access right 
for the printer is necessary for the installation of the CAPT.

Summary of Contents for LASER SHOT LBP-1210



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands