manualshive.com logo in svg

Canon LASER SHOT LBP-1210, User Manual

Share
Download
Canon LASER SHOT LBP-1210 User Manual Download Page 110

Using the Canon 

Advanced Printing 

Technology

Chapter 3

Using the Canon Advanced Printing Technology

93

More Options

More Options

 accesses the settings for Toner Density, Toner Saver, and 

Automatic Image Refinement.

Toner Density

 lets you select how light or dark your pages print. Move 

the slider to the right to darken your printed output, slide it to the left to 
lighten your printed output.

Toner Saver

 prints only alternate data bits, so toner consumption is 

reduced.

Automatic Image Refinement

 is a printer technology from Canon, with 

which the printer automatically senses and refines the jagged edges and 
ragged curves of characters and graphics.

Checking the Status of a Print Job

You can track and control your print jobs using either of the following 
methods:

❏

The Canon LASER SHOT LBP-1210 Status Window
Tells you exactly what is happening with the current print job.

❏

The Windows Printers folder
Helps you control and manage all print jobs in a queue for all printers 
installed in Windows.

Summary of Contents for LASER SHOT LBP-1210



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands