manualshive.com logo in svg

Canon LASER CLASS 730i, Service Manual

Share
Download
Canon LASER CLASS 730i Service Manual Download Page 66

LASER CLASS 730i/720i/710 Chapter 3: Assembly and Disassembly

3-4

1.4 All Clear (Action in the Event of Abnormality)

In the event of extreme noise or shock, etc., in very rate cases, the display may go out, and all
the keys become inoperable. In that case, perform an All Clear.
This operation returns all values and settings to their default settings. However, as all settings,
such as received images and user data, service data, etc., will be re-initialized, be sure to note
down any settings that you will need to re-enter later.

Figure 3-1 All Clear Operation

While waiting to return to the ready state after executing “All clear”, please
do not press the stop button. Doing so may cause a malfunction afterwards.

Standby

#12 CLEAR
CLEAR   OK

PLEASE WAIT

Set

SERVICE MODE
#12 CLEAR

Data Registration

#

Display #12 CLEAR by
pressing     or     button

Display ALL by
pressing     or     button

#12 CLEAR
ALL

Set

manuals4you.com

manuals4you.com

Summary of Contents for LASER CLASS 730i





















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands