Canon iR3225N, User Manual, Page: 17 / 52

17
1. Press additional functions
2. Press common settings
3. Press downward arrow to page 3/6
4. Press register form for form composition
5. Press register
6. Choose paper size
7. Press next
8. Select Entire Image or Transparent
9. Press Form Name
10. Enter Name of Document
11. Press Start to Scan background image
12. Press Done X 3
To use Form Composition
1. Press Form Composition
2. Select Form from the list
3. Press OK
4. Press Done
5. Place document you are merging into the document feeder and press the start key
Job Block Combination
This feature is an extension to Job Build. It will allow you to build a document with a maximum of 32 different
sections, and apply different finishing options to each section. The whole document can either be collated,
stapled or grouped, however each section can be printed from a different paper source and have different duplex
options applied. Each section can also include items such as Watermarks, Numbering etc. to mention but a few
To Operate
1. Select Special Features, and arrow down to second screen.
2. Choose JOB BLOCK COMBINATION.
3. Press FINISHER
4. Select how you want your whole job to be finished. You may choose collated, stapled, grouped, stacked,
hole … punched, this will depend on what finishing options you have attached to the print engine.
5. Here you may also select other features such as watermarks, numbering etc.
6. Press OK to confirm.
7. Place first section of document in feeder to scan. The display will show ready to scan block 1Ž
8. Select the PAPER SOURCE for this section of the document.
9. Choose any TWO-SIDED options if required
10. Press GREEN START key to scan
11. After scanning is completed, press the NEXT BLOCK button.
12. Place second section of document in feeder to scan. The display will show ready to scan block 2Ž
13. Select the PAPER SOURCE for this section of the document.
14. Choose any TWO-SIDED options if required
15. Press GREEN START key to scan
16. Keep repeating from step 11, until all sections have been scanned in
17. Now choose CONF/COMBINE ALL BLOCKS.
18. In the next screen you will need to set the required number of copies and select sample set if required.
19. Press GREEN START key to PRINT.
NB. If at any time during the procedure you decide not to continue with the programming of the job, the reset key will not
cancel Job Block Combination. You must select Cancel Combination. However once the job is submitted to print you
cancel in the normal manner.