Canon iR2000 Series, Installation Procedures Manual

Page: 11 / 18

Chapter 1
3
T-1-2
F-1-2
1.1.3 Installation Procedure
0007-2709
When you have installed the Card Reader-C1, make the following selections, COPIER> FUNCTION> INSTALL>
CARD, and enter the card number you will be using; otherwise, the card will not be recognized upon insertion.
Be sure to go through the following steps on the host machine before starting the work
1. Hold down the control panel power switch for 3 sec or more.
2. Go through the shutdown sequence as instructed on the screen so that you may turn off the main power switch.
3. Turn off the main power switch.
4. Disconnect the power cable (from the wall outlet).
[1] Card reader base 1 pc.
[2] Relay harness 1 pc.
[3] TP screw (M4x25) 1 pc.
[4] TP screw (M4x8) 1 pc.
[5] Toothed washer 2 pc.