Canon iPF605 - imagePROGRAF Color Inkjet Printer, Service Manual

Page: 46 / 268

Chapter 1
1-32
[Adjust Printer]
T-1-17
[Interface Setup]
T-1-18
[Maintenance]
T-1-19
Setting Item Description, Instructions
[Auto Head Adj.] [Standard Adj.] Choose Yes to have the printer print and read a test pattern for the automatic
adjustment of Printhead alignment relative to the printing direction.
[Advanced Adj.] Choose Yes to have the printer print and read a test pattern for the automatic
adjustment of Printhead alignment relative to the nozzle, ink tank, and printing
direction.
Three sheets are required when printing on sheets.
[Auto Print] Choose On to have the printer automatically execute the Advanced Adj. operations
after you replace the Printhead .
[Manual Head Adj] Choose Yes to print a test pattern for adjustment of Printhead alignment relative to
the printing direction. Enter the adjustment value manually based on the resulting
pattern.
[Auto Band Adj.] [Standard Adj.] Choose Yes to have the printer print and read a test pattern for band adjustment,
based on which the printer automatically adjusts the feed amount.
[Advanced Adj.] Choose this option when using paper other than genuine Canon paper, or paper for
purposes other than checking output.
Choose Yes to have the printer print and read a test pattern for band adjustment,
based on which the printer automatically adjusts the feed amount. Note that this
function takes more time and requires more ink than Standard Adj.
Two sheets are required when printing on sheets.
[Manual Band Adj] Choose Yes to print a test pattern for adjusting the feed amount based on the paper
type.
Two sheets are required when printing on sheets.
[Adj Far Ed Feed] [Choose Yes to print a test pattern for adjusting the feed amount of the trailing edge
of paper based on the paper type.
[Adjust Length] Choose Yes to print a test pattern for adjustment relative to paper stretching or
shrinkage, after which you can enter the amount of adjustment.
Setting Item Description, Instructions
[EOP Timer] Specify the timeout period for print jobs.
[TCP/IP] [IP Mode] Choose whether the printer IP address is configured automatically or a static IP
address is entered manually.
[Protocol] [DHCP] Specify the protocol used to configure the IP address automatically.
[BOOTP]
[RARP]
[IP Setting] [IP Address] Specify the printer network information when using a static IP address.
Enter the IP address assigned to the printer, as well as the network subnet mask
and default gateway.
[Subnet Mask]
[Default G/W]
[NetWare] [NetWare] Specify the NetWare protocol. To apply your changes, choose Store Setting .
[Frame Type] Specify the frame type to use.
[Print Service] Choose the print service.
[AppleTalk] Specify whether to use the AppleTalk protocol. To apply your changes, choose
Store Setting .
[Ethernet Driver] [Auto Detect] Specify the communication method. To apply your changes, choose Store
Setting .
Choose On for automatic configuration of the LAN communication protocol.
Choose Off to use settings values of Comm.Mode and Ethernet Type .
[Comm.Mode] Choose the LAN communication method.
[Ethernet Type] Choose the LAN transfer rate.
[Spanning Tree] Choose whether spanning-tree packets are supported over the LAN.
[MAC Address] Displays the MAC address.
[Ext.Interface] When installing the expansion interface board, choose whether the expansion
interface board is used.
[Init. Settings]
A confirmation message is displayed if you press the button. Choose [OK]
to restore the network settings to the default values.
Setting Item Description, Instructions
[Repl. maint. cart.] When exchanging the maintenance cartridge, choose Yes and follow the instructions on the screen.
[Replace P.head] Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low.
When replacing the Printhead , choose Yes and follow the instructions on the screen.
[Move Printer] Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low.
When transferring the printer to another location, choose Yes and follow the instructions on the screen.
[Clean Platen] Use this function to clean inside the Top Cover . After you select Yes , the Carriage is moved in preparation
for Platen cleaning.