manualshive.com logo in svg

Canon iPF605 - imagePROGRAF Color Inkjet Printer, Service Manual

Share
Download
Canon iPF605 - imagePROGRAF Color Inkjet Printer Service Manual Download Page 118

Chapter 3  

3-4

(6) Lift the Belt Stopper [2] of the Carriage Shaft [1] and pull it forward to remove it.

F-3-9

MEMO:

- You will need the Belt Stopper if you move the printer to another location. Do not discard the Belt Stopper you have removed.
- When you open the Top Cover, you will find a Cleaning Brush [3] on the right side. Use this brush to clean inside the Top Cover.

(7) Plug the power cord into the Power Socket on the back of the printer. 

F-3-10

(8) Plug the power cord into the outlet.

F-3-11

(9) Set the printhead.
Press the Power botton to power on the printer.

F-3-12

(10) When Open Top Cover is displayed on the Display Screen, open the Top Cover.

F-3-13

[1]

[2]

[3]

OK

Summary of Contents for iPF605 - imagePROGRAF Color Inkjet Printer













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands