1. MAINTENANCE
1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and
Replacement Consumables by Service Engineer
(1) Adjustment
*1: Red screws of paper feed motor
The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit.
(2) Periodic maintenance
No periodic maintenance is necessary.
(3) Periodic replacement parts
There are no parts in this machine that require periodic replacement by a service engineer.
(4) Replacement consumables
There are no consumables that require replacement by a service engineer.
Adjustment
Timing
Purpose
Tool
Approx.
time
EEPROM
initialization
(EEPROM
settings)
At logic board ass'y replacement
To initialize settings other than
the following:
- USB serial number
- Destination setting
- Waste ink counter
None.
1 min.
Destination
settings
(EEPROM
settings)
At logic board ass'y replacement
To set the destination.
None.
1 min.
LCD language
settings
At logic board ass'y replacement To set the language to be
displayed on the LCD.
None.
1 min.
Waste ink
counter
resetting
(EEPROM
settings)
- At bottom case unit
replacement
- At ink absorber replacement
To reset the waste ink counter.
None.
1 min.
Print head
alignment
- At printer setup
- At print head replacement
- At logic board ass'y
replacement
- At carriage unit replacement
To ensure accurate dot
placement.
- Machine buttons
(Auto/Manual)
- Computer
(settings via the
printer driver)
(Auto/Manual)
Auto:4
min.
Manual:3
min.
Paper feed
motor position
adjustment
*1
At paper feed motor unit
replacement
To adjust the belt tension.
(Position the paper feed motor so
that the belt is stretched tight.)
None.
2 min.
Grease
application
- At carriage unit replacement
- At bottom case unit
replacement
- At platen replacement
- At eject roller replacement
- At cap blade unit replacement
-
- To maintain sliding properties
of the carriage, cap blade unit,
and eject rollers.
- FLOIL KG-
107A (QY9-
0057)
- MOLYKOTE
PG641 (CK-
0562)
1 min.
1-1
Summary of Contents for iP6220D - PIXMA Color Inkjet Printer
