3
Installing the FINE Cartridges
• Never attempt to plug the power cord into the power outlet or unplug the power cord when your hands are wet.
• Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy objects
on the power cord.
• Never use any power supply other than the standard power supply available in the country of purchase.
Using the incorrect voltage and frequency could cause a fire or electric shock.
• Always push the plug all the way into the power outlet.
• For safety reasons, store FINE Cartridge out of the reach of small children.
• Do not drop or shake FINE Cartridge as this may cause the ink to leak out and stain your clothes and
hands.
1111
Open the card slot cover first and the
front cover next.
The FINE Cartridge holder automatically moves to the left.
2222
Take out the Color FINE Cartridge
(CL-51) from its box.
3333
Remove the protective tape gently.
4444
Insert the Color FINE Cartridge slightly
slanted into the left slot (C).
5555
Push up the Color FINE Cartridge until it
clicks into place.
6666
Use the same procedure to install the
Photo FINE Cartridge (CL-52).
The Photo FINE Cartridge should be installed into the
left slot (P).
7777
Close the front cover first and the card
slot cover next.
Wait until the preparatory operation is complete; it
takes about one to two minutes.
The message requesting head alignment is displayed
on the LCD. See “Aligning the Print Head” on page 4.
• Do not touch the electrical
contacts or print head nozzles
on a FINE Cartridge.
• Handle the removed
protective tape carefully to
avoid getting your hands
dirty or staining surrounding
work area.
• Do not attempt to reattach the
protective tape once you have
removed it.
Protective tape
To the FINE
Cartridge
holder
Electrical contacts
Print head
nozzles
iP6220_6210D_QSG.fm Page 3 Tuesday, July 26, 2005 11:47 AM
