(3/21)
LED
(Blinking in
orange)
Error
Error
code
Solution Remarks
Faulty EEPROM data of
the print head.
[1405]
head.
[1841
*2
,
1846
*2
,
1851
*1
,
1856
*1
]
Close the inner cover, and press
the Resume/Cancel button.
Inner cover error.
[1850
*1
,
1855
*1
]
Open the inner cover, place the
CD-R tray and press
Resume/Cancel.
6 times
Time-out in CD / DVD
print operation.
[1830
*1
] A prescribed period of time (12
minutes) has elapsed without any
printing since printing was
attempted. Press the
Resume/Cancel button to clear
the error.
Multiple ink tanks of the
same color installed.
[1681] Replace the wrong ink tank(s)
with the correct one(s).
7 times
Ink tank in a wrong
position.
[1680]
Install the ink tank(s) in the correct
position.
8 times
Warning: The ink
absorber becomes
almost full.
[1700/
1701]
Replace the ink absorber, and
reset its counter. [See 2-2.
Adjustment / Settings, (4) Service
mode]
Pressing the Resume/Cancel
button will exit the error, and
enable printing without replacing
the ink absorber. However, when
the ink absorber becomes full, no
further printing can be performed
unless the applicable ink absorber
is replaced.
The error “The ink
absorber becomes
almost full (service
call)” may occur soon.
9 times
The connected digital
camera or digital video
camera does not support
Camera Direct Printing.
[2001] Remove the cable between the
camera and the printer.
10 times
Automatic duplex
printing cannot be
performed.
[1310] The paper length is not supported
for duplex printing.
Press the
Resume/Cancel
button
to eject the paper being used at
error occurrence.
Data which was to be printed on
the back side of paper at error
occurrence is skipped (not
printed).
Data which was to be
printed on the back
side of paper at error
occurrence is not
printed.
