Canon imageRUNNER C3480, Manual

Page: 240 / 448

Using Image Creation Modes 4-62
4
Spe
c
ial Co
p
y
in
g and
Mai
l
Bo
x F
eatures
Area Designation
This mode enables you to frame areas to scan/copy, or areas to blank out in the
scanned image. You can designate up to four areas using the edit pen on the
preview screen, or the numeric keys on the control panel. You can designate up to
four different areas.
IMPORTANT
•
To use Area Designation (Framing) with the Image Repeat mode, first specify the Image
Repeat mode, and then designate the desired area. Only one area can be designated.
•
The designated area is too small, the color original may be scanned in the Black mode
even if the color mode is set to 'Auto-Color Select'.
NOTE
•
You cannot use the Area Designation mode for images that have already been stored in
an inbox. This mode is available only when you scan an image for the first time using the
Mail Box function.
•
You can use the numeric keys to modify areas designated with the edit pen.
•
If you designate an area using the edit pen, the output image may not reflect the
designated area precisely. To designate an area precisely, enter the values using the
numeric keys.