Canon imageRUNNER ADVANCE C9075S PRO, Operating Information Manual, Page: 339 / 456

Create a hotfolder
Introduction
The information in this section is intended for key operators.
#
NOTE
• You can create up to 10 hotfolders.
• For this procedure, the Key operator PIN is required.
Before you begin
The hotfolder function must be activated. Otherwise, the system administrator must ac-
tivate the hotfolder function first.
How to create a hotfolder
1.
Open your web browser and enter the host name or IP address of your PRISMAsync
controller.
2. Go to the 'Workflow' -> 'Hotfolders' section.
3.
Click 'Add'.
4.
Give the hotfolder a logical name.
5.
Select the workflow folder to which you want to link.
6. Click 'OK'.
Chapter 10 - Adapt printer settings to your needs 339
Create a hotfolder