Home
/
Canon
/
imageRUNNER ADVANCE C9075S PRO
/
Operating Information Manual

Canon imageRUNNER ADVANCE C9075S PRO, Operating Information Manual, Page: 259 / 456

Share

Page: 259 / 456

Canon imageRUNNER ADVANCE C9075S PRO Operating Information Manual Download Page 259

#

NOTE

• For high-quality printouts, use paper recommended by your authorized dealer.
• Before loading paper, always fan the sheets several times, and align the edges to

facilitate feeding.

3.

Lift the feeding support roller.
If Paper Deck Unit-A1 is attached, proceed to step 4.

#

IMPORTANT

• When loading paper, be sure to first lift the feeding support roller. If you load

paper without raising the feeding support roller, it may become detached, and
paper may not be fed properly.

• Using the paper deck with the feeding support roller detached may cause paper

jams.

4.

Load the paper stack into the paper deck.

Chapter 9 - Paper, toner, and staples

259

Load the media into the bulk paper modules

«
...
257
258
259
260
261
...
»

Summary of Contents for imageRUNNER ADVANCE C9075S PRO









































































































































































































































































































































































































































































Reviews:

No comments