Canon imageRUNNER ADVANCE C9075S PRO, Operating Information Manual, Page: 162 / 456

Change the settings for covers
Introduction
When front covers or back covers are required, the settings are usually set in the printer
driver, for example. However, you can view and change the settings for the covers via the
operator panel.
You can change the following settings for both the front cover and the back cover sepa-
rately.
• Enable or disable the use of a cover.
• Select the desired media from the 'Media catalog'.
• Indicate whether the cover must be left empty, or printed 1-sided and/or 2-sided.
How to change the settings for covers
1. Touch 'Jobs' -> 'Waiting jobs'.
2.
Touch the job of which you want to change the cover settings.
#
NOTE
You cannot change this setting for the active print job .
3.
Touch 'Properties' - or touch the job 2x to open the 'Properties' window.
4.
Touch the 'Cover' button.
5. Make the required changes.
6.
Press 'OK'.
7.
Press 'OK'.
Chapter 6 - Print jobs 162
Change the settings for covers