Canon IMAGERUNNER ADVANCE C5051, User Manual, Page: 20 / 152

Paper Deck Unit-B1 (Optional)
1-8
1
Routine Maintenance
2
Open a package of paper, and remove the paper stack .
When loading paper, take care not to cut your hands on the edges of the paper .
Rewrap any remaining paper in its original package, and store it in a dry place, away from direct sunlight.
Do not load the following types of paper into the paper deck unit. Doing so may cause a paper jam.
Severely curled or wrinkled paper
Thin straw paper
Transparencies
Paper which has been printed on using a thermal transfer printer (Do not print on the reverse side of this paper either.)
For high-quality printouts, use paper recommended by Canon.
Before loading paper, always fan the sheets several times, and align the edges to facilitate feeding.
3
Load the paper stack into the paper deck .
Make sure that the inside lifter has lowered before loading paper, and even out the edges of the paper stack.
Paper which has been rolled or curled must be straightened out before loading it into the paper deck unit.
Make sure that the height of the paper stack does not exceed the loading limit mark ( ) on the inside of the paper deck unit.
The paper deck unit holds approximately 2,700 sheets of paper (20 lb bond (80 g/m 2 )).
Load the paper stack in stages, adding approximately 500 sheets of paper (20 lb bond (80 g/m
2
)) at a time. If the paper deck unit can
accommodate more paper, the lifter will descend.
Only load LTR paper into the paper deck unit. Paper cannot be loaded horizontally.
If there are instructions on the package of paper about which side of the paper to load, follow those instructions.
When paper is loaded in the paper deck unit, the side facing down is the one printed on.
If problems occur, such as poor print quality or paper jams, try turning the paper stack over, and reload it.
For more information on the print direction of preprinted paper (paper which has logos or patterns already printed on it), see Chapter
16, "Appendix," in Getting Started.
•
•
-
-
-
-
•
•
•
•
•
•
•
•
•
•
•