Canon IMAGERUNNER ADVANCE C5051, User Manual, Page: 134 / 152

List of Error Messages
2-64
2
Troubleshooting
# 009
Cause 1 There is no paper.
Remedy Load paper. (See “Paper Drawers,” on p. 1-2.)
Cause 2 The paper drawer is not inserted correctly into the machine.
Remedy Insert the paper drawer properly. (See “Paper Drawers,” on p. 1-2.)
# 099
Cause Copying/printing was interrupted.
Remedy Try copying/printing again.
# 401
Cause 1 When the data was being written to the medium, the machine detected that the medium was full.
Remedy Use the memory medium with sufficient free space.
Cause 2 An error occurred because the main power switch was turned OFF while a job was being processed.
Remedy Check to see if the main power switch is turned ON. Try processing the job again, if necessary. (See e-Manual > Before You Start
Using This Machine.)
# 403
Cause The job was failed because the same file name existed. Generally, if the same file name exists, a file will be automatically renamed
by adding a number, which ranges from 1 to 999, to the tail of its file name in order to avoid naming conflicts. However, this error
occurred because the file with the same number already added to its file name existed.
Remedy Rename the file, and then write the data again.
# 404
Cause The job was failed because the write protect switch of the medium was turned ON.
Remedy Turn OFF the write protect switch of the medium.