Canon imageRUNNER ADVANCE 8505i Faq Manual Download Page 43

43

A

pp

en

dix

or your use of CDS Service for a Product 

shall be considered

(i)   a representation that you have an 

internal IP network and internet access 

available to Products connected 

to that network on a generally 

continuous basis;

(ii)  a representation that you have an 

internet connection and internal 

network bandwidth available for 

the Canon Server to download files 

to each of the Products receiving 

the CDS Service. Downloaded files 

may vary in size; some will be on the 

order of several hundred MB. The 

CDS Service Technology White Paper 

contains further details.

(iii) authorization by you for the Canon  

Seller to establish, and perform during 

the period of provision of Service, 

HTTPS/HTTP communications using 

your internet and internal network 

bandwidth for transmissions to and 

from the CDS Server;

(iv)  authorization by you for the Product 

itself or a Canon serviceperson to 

download or update firmware and 

purchased MEAP application software, 

data for internet-based activation of 

optional Product features and certain 

related data files to Product from the 

CDS Server, and to transmit service 

data (e.g. serial number, information 

of firmware) of Product to the CDS 

Server.

You acknowledge and agree that the 

Canon Seller and CDS Server may rely on 

internet addresses you assign to Products 

and that using the internet has benefits 

but also certain risks; ACCORDINGLY, 

YOU AGREE THAT THE CDS SERVICE IS 

PROVIDED WITHOUT WARRANTY OF 

ANY KIND, THAT ANY WARRANTIES 

ARE DISCLAIMED AND THAT NO 

CANON SELLER OR CANON AFFILIATE IS 

RESPONSIBLE FOR ANY INJURY TO YOUR 

NETWORK OR TO DATA OR DEVICES 

NOT SUPPLIED BY A CANON SELLER. You 

will be responsible for network security 

and any data back-up. You will timely 

advise the Canon Seller of any security 

procedures the Canon Seller will need to 

use to provide CDS Services as described 

herein.

To the extent downloads involve 

presenting end user license terms on your 

network or network-connected Products 

(with a Canon Seller, Canon affiliate or a 

third party as licensor) seeking agreement 

to such terms, any party that you allow to 

respond to presented license terms will 

be and is authorized by you to agree (or 

not agree) to the terms; if license terms 

are not agreed, a license purchased will 

not be enabled and you may apply for 

refund of any license fees paid.

You acknowledge and agree that the 

firmware provided by the CDS Service 

is governed by the Third Party Software 

terms set forth in this manual.

and transmission functions for which it 

is configured when delivered and you 

obtain the benefits of IWR as outlined 

in Canon published materials), (C) you 

shall not disassemble, decompile, reverse 

engineer, disclose or attempt to copy 

such IWR software, allow any third party 

to do any of the foregoing or transfer your 

limited rights to any other party without 

the prior written approval of Canon USA 

or Canon Canada; and (D) there are many 

factors outside of the control of Canon 

USA, Canon Canada or their respective 

dealers that could affect the accuracy 

or timing of meter readings or service 

data harvested by IWR and, except 

as expressly provided in the limited 

warranty statement for the Product or 

the End-User License Agreement for EMC 

software, in the case of the IWR Plug-

in program, neither Canon USA, Canon 

Canada nor their respective dealers shall 

be responsible for alleged deficiencies in, 

or your dissatisfaction with, IWR or any 

software used to provide IWR. A copy of 

the limited warranty statement can be 

found within this Operator's Manual.

If you dealer ceases to be an authorized 

Canon USA dealer, it will no longer 

have access to the use and service data 

accumulated by IWR for your Product. 

In that case, you may request or instruct 

Canon USA to recommend to you an 

alternative service provider who will have 

access to this data in order to maintain 

Product service utilizing IWR functionality.

TERMS OF Content 

Delivery System

If the Content Delivery System (CDS) 

Service is enabled for your Canon Office 

Imaging Product ("Product"), Canon 

USA, Canon Canada or their respective 

authorized independent Canon retail 

dealers (each a "Canon Seller") can 

arrange internet-based downloads 

for purposes of updating firmware, 

delivering purchased MEAP application 

software and activation of optional 

Product features. Certain related data 

files also may be downloaded (e.g. End-

User License Agreements, conditions of 

export, Release Notes) to your Product. 

The internet communications will occur 

between the Product and one or more 

servers managed by Canon Inc. ("Canon 

Server"). CDS Service will not download 

the firmware,

software or data files for purposes other 

than mentioned above.

You can read more about CDS Service in 

Canon published materials available from 

your dealer or on the web sites of Canon 

USA [www.usa.canon.com] or Canon 

Canada [www.canon.ca.]. These materials 

include a Technology White Paper for the 

CDS Service.

Your instruction to Canon USA, Canon 

Canada or your dealer to use CDS Service 

 

ACCEPTANCE

THE TERMS OF THIS THIRD PARTY 

SOFTWARE STATED HERE OR IN RELATED 

WARRANTY PROVISIONS SHALL BE 

DEEMED ACCEPTED UPON YOUR USE 

OF THE PRODUCT FOR ONE OR MORE 

OF ITS NORMAL PURPOSES, IF THERE 

HAS BEEN NO OTHER PRIOR EXPRESS 

ACCEPTANCE.

THE TERMS OF THIS THIRD PARTY 

SOFTWARE GOVERN THE THIRD PARTY 

SOFTWARE AS DELIVERED WITH THE 

PRODUCT AND ALL UPDATED VERSIONS 

OF THE THIRD PARTY SOFTWARE 

PROVIDED UNDER MAINTENANCE 

AGREEMENTS OR OTHER SERVICE 

ARRANGEMENTS FOR THE PRODUCT 

WITH CANON USA OR CANON CANADA 

OR THEIR RESPECTIVE AUTHORIZED 

SERVICE ORGANIZATIONS.

TERMS OF imageWARE 

REMOTE SERVICE

If your Canon Office Imaging Product 

("Product") is enabled with embedded 

functions for the imageWARE Remote 

Diagnostic Service ("IWR"), or your 

Product is not IWR enabled but it 

interacts with the IWR Plug-in program 

of imageWARE Enterprise Management 

Console ("EMC") software, then Canon 

USA, Canon Canada or their respective 

authorized independent Canon retail 

dealers can access Product meter 

readings and receive notifications of 

certain service errors automatically via the 

internet. You can read more about IWR 

in Canon published materials available 

from your dealer or on the web sites of 

Canon USA [www.usa.canon.com] or 

Canon Canada [www.canon.ca.]. IWR will 

only collect and transmit Product specific 

meter readings and service data, and will 

not access, collect or transmit End-User 

image data in the Product.

Your instruction to Canon USA, Canon 

Canada or your dealer to activate IWR 

for a Product shall be considered (i) 

a representation that you have an 

internal IP network and internet access 

available on a generally continuous 

basis; (ii) authorization, by you establish, 

and perform during the period of IWR 

activation, HTTPS communications 

using your network bandwidth for 

transmissions over the internet of use and 

service data accumulated by the Product, 

and (iii) authorization by you to store, 

analyze and use this data for purposes 

related to servicing the Product and for 

Product and IWR improvement.

By so instructing Canon USA, Canon 

Canada or your dealer, you shall also be 

considered to acknowledge that (A) the 

IWR software (embedded or plug-in) is 

the confidential property of Canon USA 

and its licensor; (B) you have no rights in 

such IWR software (except as the Product 

executes the limited data collection 

Summary of Contents for imageRUNNER ADVANCE 8505i

















































Reviews: