Canon imageRUNNER ADVANCE 8505i Faq Manual Download Page 40

40

Appendix

A

pp

en

dix

devices that may be connected to a 

telephone line. Excessive RENs on a

telephone line may result in the devices 

not ringing in response to an incoming 

call. In most, but not all areas, the sum 

of the RENs should not exceed five 

(5.0). To be certain of the number of 

devices that may be connected to a 

line, as determined by the total RENs, 

contact the local telephone company. 

The REN for this product is part of 

the product identifier that has the 

format US:AAAEQ##TXXXX. The digits 

represented by ## are the REN without a 

decimal point (e.g., 10 is a REN of 1.0).

An FCC compliant telephone line cable 

and modular plug is provided with this 

equipment. This equipment is designed 

to be connected to the telephone 

network or premise wiring using a 

compatible modular jack that is Part 68 

compliant.

This equipment may not be used on 

coin service provided by the telephone 

company. Connection to party lines is 

subject to state tariffs.

In Case of Equipment Malfunction

Should any malfunction occur which 

cannot be corrected by the procedures 

described in the User's Guide, disconnect 

the equipment from the telephone 

line cable and disconnect the power 

cord. The telephone line cable should 

not be reconnected or the main power 

switch turned ON until the problem 

is completely resolved. Users should 

contact their local authorized Canon 

Facsimile Service Dealer for the servicing 

of equipment.

If your equipment malfunctions, please 

contact your local authorized Canon 

dealer from whom you purchased the 

equipment (if under warranty), or with 

whom you have a servicing contract. 

If you are not sure who to contact, and 

have both purchased and are using the 

equipment in the U.S.A., please refer to 

the "SUPPORT" page on Canon U.S.A.'s 

Web site (http://www.usa.canon.com).

Rights of the Telephone Company

If this equipment imageRUNNER 

ADVANCE 8505i/8595i/8585i causes 

harm to the telephone network, the 

telephone company may temporarily 

disconnect service.

The telephone company also retains the 

right to make changes in facilities and 

services that may affect the operation 

of this equipment. When such changes 

are necessary, the telephone company 

is required to give adequate prior notice 

to the user. However, if advance notice is 

not possible, the telephone company will 

notify the customer as soon as possible. 

Also, the customer will be advised of his/

her right to file a complaint with the FCC 

if he/she believes it is necessary.

N O T E

The fax function is available only if the 

FAX Board is installed.

A. Location

Supply a suitable table, cabinet, or desk 

for the machine.

See "Specifications" in this guide for 

specific dimensions and weight.

B. Order Information

1.   A single telephone line (touch-tone 

or rotary) should be used. If the Super 

G3 2nd Line Fax Board is installed, a 

multi telephone line (touch-tone or 

rotary) can be used.

2.  Order an RJ11-C telephone wall jack 

(USOC), which should be installed by 

the telephone company. If the RJ11-C 

wall jack is not present, telephone/

facsimile operation is not possible.

3.  Order a normal business line from 

your telephone company's business 

representative. The line should be 

a regular voice grade line or an 

equivalent one. Use one line per unit. 

If the Super G3 2nd Line Fax Board is 

installed, you can use a multi-line.

DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Dial) 

line if you communicate overseas

N O T E

Canon recommends an individual line 

following industry standards, i.e., 2500 

(touch-tone) or 500 (rotary/pulse dial) 

telephones. A dedicated extension off 

a PBX (Private Branch eXchange) unit 

without "Call Waiting" can be used 

with your facsimile unit. Key telephone 

systems are not recommended because 

they send nonstandard signals to 

individual telephones for ringing and 

special codes, which may cause a 

facsimile error.

C. Power Requirements

The machine should be connected 

to a standard 120 volt AC, three-wire 

grounded outlet only.

Do not connect this machine to an 

outlet or power line shared with other 

appliances that cause "electrical noise." 

Air conditioners, electric typewriters, 

copiers, and machines of this sort 

generate electrical noise that often 

interferes with communications 

equipment and the sending and 

receiving of documents.

Connection of the Equipment

This equipment complies with Part 68 

of the FCC rules and the requirements 

adopted by the ACTA. On the rear 

panel of this equipment is a label that 

contains, among other information, 

a product identifier in the format of 

US:AAAEQ##TXXXX. If requested, 

this number must be provided to the 

telephone company.

The REN (Ringer Equivalence Number) 

is used to determine the number of 

 

Disclaimers

The information in this document is 

subject to change without notice.

CANON INC. MAKES NO WARRANTY 

OF ANY KIND WITH REGARD TO 

THIS MATERIAL, EITHER EXPRESS OR 

IMPLIED, EXCEPT AS PROVIDED HEREIN, 

INCLUDING WITHOUT LIMITATION, 

THEREOF, WARRANTIES AS TO 

MARKETABILITY, MERCHANTABILITY, 

FITNESS FOR A PARTICULAR PURPOSE 

OR USE, OR NON-INFRINGEMENT. 

CANON INC. SHALL NOT BE LIABLE 

FOR ANY DIRECT, INCIDENTAL, OR 

CONSEQUENTIAL DAMAGES OF ANY 

NATURE, OR LOSSES OR EXPENSES 

RESULTING FROM THE USE OF THIS 

MATERIAL.

The following applies in California, USA 

only:

The battery included with your product 

contains

Perchlorate Material and may require 

special handling.

See http://www.dtsc.ca.gov/

hazardouswaste/ perchlorate/ for details.

 

Legal Limitations on the Usage 

of Your Product and the Use of 

Images

Using your product to scan, print or 

otherwise reproduce certain documents, 

and the use of such images as scanned, 

printed or otherwise reproduced by 

your product, may be prohibited by law 

and may result in criminal and/or civil 

liability. A non-exhaustive list of these 

documents is set forth below. This list is 

intended to be a guide only. If you are 

uncertain about the legality of using 

your product to scan, print or otherwise 

reproduce any particular document, 

and/or of the use of the images scanned, 

printed or otherwise reproduced, you 

should consult in advance with your 

legal advisor for guidance.

• 

Paper Money

• 

Travelers Checks

• 

Money Orders

• 

Food Stamps

• 

Certificates of Deposit

• 

Passports

• 

Postage Stamps (cancelled or 

uncancelled)

• 

Immigration Papers

• 

Identifying Badges or Insignias

• 

Internal Revenue Stamps (cancelled or 

uncancelled)

• 

Selective Service or Draft Papers

• 

Bonds or Other Certificates of 

Indebtedness

• 

Checks or Drafts Issued by 

Governmental Agencies

• 

Stock Certificates

• 

Motor Vehicle Licenses and Certificates 

of Title

• 

Copyrighted Works/Works of Art 

without Permission of Copyright 

Owner

 

Users in the U.S.A.

Preinstallation Requirements for Canon 

Facsimile Equipment

Summary of Contents for imageRUNNER ADVANCE 8505i

















































Reviews: