41
A
pp
en
dix
N O T E
This equipment complies with the
Canadian ICES-003 Class A limits.
Utilisation au Canada
Conditions à Remplir Préalablement à
L'installation d'un Télécopieur Canon
N O T E
La fonction de Fax est disponible
uniquement lorsqu'une carte FAX est
installee.
A. Emplacement
Prévoir une table, un meuble, ou un
bureau suffisamment solide et de taille
appropriée (voir "Spécifications" pour les
indications de poids et dimensions).
B. Installation téléphonique
1. Une seule ligne téléphonique
(tonalités ou impulsions) doit être
utilisée. Si le Super G3 2nd Line
Fax Board en option est installé,
il est possible d'utiliser une ligne
téléphonique multiple (tonalités ou
impulsions).
2. Il faut commander un jack modulaire
CA11A qui sera installé par la
compagnie téléphonique. Sans ce
jack, la mise en place serait impossible.
3. Si vous vous abonnez à une nouvelle
ligne, demandez une ligne d'affaires
normale de qualité téléphonique
courante ou équivalente. Prenez un
abonnement d'une ligne par appareil.
Si le Super G3 2nd Line Fax Board
en option est installé, il est possible
d'utiliser une ligne téléphonique
multiple.
Ligne automatique interurbaine ou
Ligne automatique international (si vous
communiquez avec les pays étrangers)
N O T E
Canon vous conseille d'utiliser une
ligne individuelle conforme aux normes
industrielles, à savoir: ligne téléphonique
2500 (pour appareil à clavier) ou 500
(pour appareil à cadran/impulsions). Il
est également possible de raccorder ce
télécopieur à un système téléphonique à
poussoirs car la plupart de ces systèmes
émettent des signaux d'appel non
normalisés ou des codes spéciaux qui
risquent de perturber le fonctionnement
du télécopieur.
C. Condition d'alimentation
Raccordez le télécopieur à une prise de
courant plus terre à trois branches, du
type simple ou double, et qui ne sert
pas à alimenter un copieur, un appareil
de chauffage, un climatiseur ou tout
autre appareil électrique à thermostat.
L'alimentation doit être de 115 volts et
15 ampères. Pour faciliter l'installation, le
jack CA11A doit être assez proche de la
prise de courant.
Remarques
•
Le présent matériel est conforme aux
spécifications techniques applicables
d'Industrie Canada.
without "Call Waiting" can be used
with your facsimile unit. Key telephone
systems are not recommended because
they send nonstandard signals to
individual telephones for ringing and
special codes, which may cause a
facsimile error.
C. Power Requirements
The power outlet should be a three-
prong grounded receptacle (Single
or Duplex). It should be independent
from copiers, heaters, air conditioners,
or any electric equipment that is
thermostatically controlled. The rated
value is 115 volts and 15 amperes. The
CA11A modular jack should be relatively
close to the power outlet to facilitate
installation.
Notice
•
This product meets the applicable
Industry Canada technical
specifications.
•
Before installing this equipment, users
should ensure that it is permissible
to be connected to the facilities
of the local telecommunications
company. The equipment must also
be installed using an acceptable
method of connection. In some
cases, the company's inside wiring
associated with a single line individual
service may be extended by means
of a certified connector assembly
(telephone extension cord). The
customer should be aware that
compliance with the above conditions
may not prevent deterioration of
service in some situations.
•
The Ringer Equivalence Number is an
indication of the maximum number of
devices allowed to be connected to a
telephone interface. The termination
of an interface may consist of any
combination of devices subject only
to the requirement that the sum of
the RENs of all the devices does not
exceed five.
•
The REN of this product is 1.0.
•
Repairs to certified equipment should
be made by an authorized Canadian
maintenance facility designated by
the supplier. Any repairs or alterations
made by the user to this equipment,
or equipment malfunctions, may
give the telecommunications
company cause to request the user to
disconnect the equipment.
•
Users should ensure for their own
protection that the electrical ground
connections of the power utility,
telephone lines, and internal metallic
water pipe system, if present, are
connected together. This precaution
may be particularly important in rural
areas.
CAUTION
Users should not attempt to make
such connections themselves, but
should contact the appropriate electric
inspection authority, or electrician, as
appropriate.
WARNING
The Telephone Consumer Protection
Act of 1991 makes it unlawful for any
person to use a computer or other
electronic device to send any message
via a telephone facsimile machine
unless such message clearly contains in
a margin at the top or bottom of each
transmitted page, or on the first page of
the transmission, the date and time it is
sent and an identification of the business
or other entity, or other individual
sending the message and the telephone
number of the sending machine or such
business, other entity, or individual. (The
telephone number provided may not
be a 900 number or any other number
for which charges exceed local or long-
distance transmission charges.)
N O T E
In order to program this information into
your machine, you should complete the
procedure for registering your name,
unit's telephone number, time, and
date as described in Basic Operations or
Setting Menu List in the User's Guide.
Users in Canada
Preinstallation Requirements for Canon
Facsimile Equipment
N O T E
The fax function is available only if the
FAX Board is installed.
A. Location
Supply a suitable table, cabinet, or desk
for the machine.
See "Specifications" in this guide for
specific dimensions and weight.
B. Order Information
1. A single telephone line (touch-tone or
rotary) should be used. If the Super G3
2nd Line Fax Board is installed, a multi
telephone line (touch-tone or rotary)
can be used.
2. Order a CA11A modular jack which
should be installed by the telephone
company. If the CA11A jack is not
present, installation cannot occur.
3. Order a normal business line from
your telephone company's business
representative. The line should be
a regular voice grade line or an
equivalent one. Use one line per unit.
If the Super G3 2nd Line Fax Board is
installed, you can use a multi-line.
DDD (Direct Distance Dial) line
or
IDDD (International Direct Distance Dial)
line if you communicate overseas
N O T E
Canon recommends an individual line
following industry standards, i.e., 2500
(touch-tone) or 500 (rotary/pulse dial)
telephones. A dedicated extension off
a PBX (Private Branch eXchange) unit