manualshive.com logo in svg

Canon imagerunner advance 8205, Service Manual

Share
Download
Canon imagerunner advance 8205 Service Manual Download Page 56

imageRUNNER ADVANCE 8200 Series Service Guide 

imageRUNNER ADVANCE 8200 Series

 

Service Guide   

November 2012 

 

 

Page 49

 

IX. 

Servicing Notes 

A.  Power and Plug Requirements 

Canon USA strongly suggests dedicated and properly grounded outlets be 
provided for the imageRUNNER ADVANCE 8200 Series devices. 
 
The  imageRUNNER ADVANCE 8200 Series

 

devices  require a NEMA 5-20 

receptacle for proper operation.  Before installation, confirm that the proper 
dedicated NEMA receptacles are available for these devices. 
 

Table 13 – Main Unit Power and Plug Requirements 

 

imageRUNNER ADVANCE 8200 Series Main Unit 

 
 

 

 
 
 

 

NEMA 5-20 Receptacle 

 

 

IMPORTANT 

•

 We recommend an additional standard 120 V/15 A outlet for service tools, 

such as a laptop computer or vacuum that may be used when servicing or 
configuring the machine. 

•

 Use only dedicated and properly grounded outlets for the main unit and 

imagePASS. It is also strongly suggested to use dedicated and properly 
grounded outlets for each optional accessory. Do not use extension cords. 
The ground connection serves to provide the internal electronics with a 
reference voltage. Faulty or poor ground sources will cause this reference 
voltage to fall into a range that no longer serves as a reliable reference 
voltage. The internal logic and programming of the imageRUNNER 
ADVANCE 8200 Series machines will not perform reliably because there is 
an insufficient difference between the internal operating signal voltages and 
the poor ground reference signal. A qualified electrician can measure and 
provide the ground source that the imageRUNNER ADVANCE 8200 Series 
machines or any computer controlled office equipment requires. 

•

 Before installation, confirm that all necessary receptacles are available. 

 

Summary of Contents for imagerunner advance 8205


































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands