Saddle Finisher-G1/Puncher Unit-K1
7-47
Handling Options
7
Saddle Finisher-G1/Puncher Unit-K1
The Saddle Finisher-G1/Puncher Unit-K1 is equipped with the following functions: Collate,
Group, Offset, Staple, Saddle Stitch, and Hole Punch mode. (See
‘
Finishing Functions,
’
on p.
7-48.)
When the Saddle Finisher-G1 is attached, the Inner 2way Tray-A1 is mandatory.
NOTE
•
When feeding 11" x 17" or LGL-size paper, pull out the auxiliary tray.
Parts and Their Functions
1
Output tray
Paper are output to this tray. You can assign the
output of speci
fi
ed function setting designated
trays. (See
‘
Setting a Dedicated Tray for Each
Function,
’
on p. 3-20.)
2
Auxiliary tray
3
Upper cover
Open to remove jammed paper. (See
‘
Clearing
Paper Jams in the Saddle Finisher-G1,
’
on p. 7-52.)
4
Punch waste tray
Take this out when discarding the punch waste.
(See
‘
Removing Punch Waste,
’
on p. 7-70.)
5
Release butten
Press to remove the
fi
nisher from the main unit.
6
Right cover
Open to remove jammed copy paper.
(See
‘
Clearing Paper Jams in the Saddle Stitcher
Unit,
’
on p. 7-54.)
7
Upper front cover
Open this cover to replace the staple case in the
stapler unit, or when a staple jam occurs.
(See
‘
Replacing the Staple Case in the Stapler
Unit,
’
on p. 7-63,
‘
Removing Jammed Staples
from the Stapler Unit,
’
on p. 7-43.)
8
Booklet tray
The paper that is folded and stapled at the center
to form a booklet is delivered to this tray.
1
3
6
8
5
2
4
7
