5
Loading Paper
5-4
Routine Maintenance
IMPORTANT
•
Rewrap any remaining paper in its original package, and store it in a dry place, away from
direct sunlight.
•
Do not load the following types of paper in the paper drawer. Doing so may cause a paper
jam.
- Severely curled or wrinkled paper
- Heavyweight paper
- Transparencies
- Paper on which color images have been copied.
- Paper which has been copied on using a digital full color copier (do not copy on the reverse
side either).
- Paper which has been printed on using a thermal transfer printer (do not copy on the
reverse side either).
NOTE
•
For high-quality print output, use paper recommended by Canon.
4
Turn the opened surface of the paper stack over, and place it in the
paper drawer.
Even out the edges of the paper stack. Load the paper stack against the right wall of the
paper drawer.
When loading paper in the paper drawer for the first time, set the size plate for the paper
being loaded.
When loading paper in the paper drawer, make sure that the paper size setting of the
paper drawer matches the size of paper.
IMPORTANT
•
If the paper is curled, curl it down before placing it in the paper drawer.
•
Make sure that the height of the paper stack does not exceed the limit mark
at the back
of the paper drawer.
NOTE
•
Each paper drawer holds about 500 sheets of paper (20-lb bond (80g/m
2
)).
•
For details of the print direction of paper already printed with logos or patterns, see
‘Relation of Original Orientation and Paper Orientation,’ on p. 8-9.
