4
4-50
Group
Item
Description
ELA-DAT
Initializes the ELA Flash/SRAM data.
ALL
Clears user and service data (except for some scan
parameters and print parameters), and the counter
setting/registration data in the system dump list,
except for the print count.
#DISPLAY
Configuration
An error code is displayed when a service error has occurred. The E code is displayed in the
upper step, and the detail code is displayed the bottom step.
Group
Item
Description
DISPLAY
ERR
The E code and detail code of the current system error are displayed.
(Multiple codes can be displayed with the left and right buttons. )
<Display example>
SYSTEM ERROR
xxx: Eyyy-zzzz Example) 001:E602-1105
xxx: History number
yyy: E Code
zzzz: Detail code
JAM
The current JAM code is displayed.
(Multiple JAM codes can be displayed with the left and right buttons.)
<Display example>
JAM ERROR
xxx:y-z-vvvv-wwww
xxx: History number
y: Description of position (3: Main unit (including the pickup assembly), 4:
ADF, 5: Finisher)
z: Cassette level (01: Manual feed tray, 1: Cassette 1, 2: Cassette 2, 3;
Cassette 3,4: Cassette 4, 7: Double-sided)
vvvv: JAM code
wwww: paper size
SPDTYPE
Display of engine speed type on controller PCB
<Display example>
SPDTYPE (Line 1)
45cpm (Line 2)
■
T-4-55
T-4-55
T-4-56
T-4-56
#ROM
Configuration
The table below lists the items of ROM display mode that are supported.
Group
Item
Description
ROM
MAIN (Bootable)
Displays the version number of the PROGRAM ROM mounted on
the main controller PCB.
MAIN2 (Boot)
Displays the version of the ROM (BOOT) mounted on the main
controller PCB.
OPROM
Not used
ECONT
Displays the version number of the ROM mounted on the DC
controller PCB.
OPTION CAS1
Not used
OPTION CAS2
Not used
OPTION CAS3
Not used
DUPLEX
Not used
FINISHER
Displays the version number of the Inner finisher
READER
Not used
#TEST MODE
Outline
Test mode must be executed by keeping track the flow of menu items appearing on the LCD.
Menu items in test mode are organized into seven blocks as described below.
Numerals enclosed in parentheses denote a numeric keypad key to be pressed each.
1. D-RAM test <(1) D-RAM TEST>
Checks to see if data can be correctly written to and read from D-RAM.
2. PG output <(3) PG>
Used to generate service test patterns.
3. MODEM test <(4) MODEM TEST>
Performs relay actuation, modem DTMF and tonal signal transmission/reception tests.
4. FUNCTION test <(6) FUNCTION TEST>
Used to verify the operations of microswitches, sensors, speakers and ADF functions.
■
■
T-4-57
T-4-57
Summary of Contents for imageRUNNER 2545
