Canon imageRUNNER 2545 Service Manual Digest Download

Page: 58 / 116

4-25

Note:

Be sure to enter the value on service label when replacing the CCD unit.

Be sure to enter the numeric value on copyboard glass when replacing the copyboard

glass.

If changing the setting value of this item, be sure to write down the changed value on

the service label.

(#SCAN> READER> ADJUST> CCD> SH-TRGT)

Shading target value of the standard white plate (backup)

This item must not be normally used.

(#SCAN> READER> ADJUST> CCD> 50_RG)

Color displacement (G-R) offset value display at BOOK mode/50% scanning

(#SCAN> READER> ADJUST> CCD> 50_GB)

Color displacement (G-B) offset value display at BOOK mode/50% scanning

(#SCAN> READER> ADJUST> CCD> 100_RG)

Color displacement (G-R) offset value display at BOOK mode/100% scanning

(#SCAN> READER> ADJUST> CCD> 100_GB)

Color displacement (G-B) offset value display at BOOK mode/100% scanning

This item must not be normally used.

Note:

Be sure to enter the value on service label when executing RAM clear of the reader

controller PCB/replacing the reader controller PCB.

If changing the setting value of this item, be sure to write down the changed value on

the service label.

(#SCAN> READER> ADJUST> CCD> 50DF_RG)

Color displacement (G-R) offset value display at ADF mode/50% scanning

(#SCAN> READER> ADJUST> CCD> 50DF_GB)

Color displacement (G-B) offset value display at ADF mode/50% scanning

(#SCAN> READER> ADJUST> CCD> 100DF_RG)

●

Color displacement (G-R) offset value display at ADF mode/100% scanning

(#SCAN> READER> ADJUST> CCD> 100DF_GB)

Color displacement (G-B) offset value display at ADF mode/100% scanning

This item must not be normally used.

Note:

Be sure to enter the value on service label when executing RAM clear of the reader

controller PCB/replacing the reader controller PCB.

If changing the setting value of this item, be sure to write down the changed value on

the service label.

(#SCAN> READER> ADJUST> CCD> DFTAR-R)

Shading target value (RED) entry when using DF (normal document scanning position)

(#SCAN> READER> ADJUST> CCD> DFTAR-G)

Shading target value (GREEN) entry when using DF (normal document scanning position)

(#SCAN> READER> ADJUST> CCD> DFTAR-B)

Shading target value (BLUE) entry when using DF (normal document scanning position)

This item must not be normally used.

(#SCAN> READER> ADJUST> CCD> CCD-CHNG)

CCD replacement flag

Set this mode when CCD replacement is completed.

(#SCAN> READER> ADJUST> CCD> DFTAR-K)

Black shading target value when using DF

This item must not be normally used.
In case of image fault (due to chart soil, etc) after executing: SCAN > READER > FUNCTION
> CCD > DFWLVL1/ DF-WLVL2; enter the factory measurement value using this mode.

(#SCAN> READER> ADJUST> CCD> MTF3-M1)

MTF setting value for R in horizontal scanning direction (front)

(#SCAN> READER> ADJUST> CCD> MTF3-M2)

MTF setting value for R in horizontal scanning direction (center)

●

Summary of Contents for imageRUNNER 2545





















































































































Search results

Summary of Contents for imageRUNNER 2545

Reviews:

Related manuals for imageRUNNER 2545

Brands by name

Popular brands

Canon imageRUNNER 2545, Service Manual Digest

Search results

Summary of Contents for imageRUNNER 2545

Reviews:

Related manuals for imageRUNNER 2545

Brands by name

Popular brands