Protocol Settings
3-16
3
Using a
TCP/IP Netw
o
rk
❑
Press [Scope Name]
➞
enter the scope name to use when discovering devices
using NetSpot Console.
❑
Press [OK].
The display returns to the TCP/IP Settings screen.
NOTE
For instructions on how to deliver and share device information, such as the
Address Book and Department ID Managemaent settings with multiple devices,
see Chapter 6, "System Manager Settings," in the
Reference Guide
.
●
If you do not want to share device information with multiple devices:
❑
On the TCP/IP Settings screen, press [
▼
] or [
▲
] until [Discovery Settings]
appears
➞
press [Discovery Settings].
❑
Press [Off] for <Response>.
❑
Press [OK].
The display returns to the TCP/IP Settings screen.
20
Specify the HTTP settings.
❑
On the TCP/IP Settings screen, press [
▼
] or [
▲
] until [Use HTTP] appears
➞
press [Use HTTP].
❑
If you want to use the Remote UI or IPP, press [On]. Otherwise, press [Off].
Pressing [Off] for [Use HTTP] automatically sets [Remote UI] and [Use IPP] to
'Off'.
❑
Press [OK].
The display returns to the TCP/IP Settings screen.
E210_NWG_US.book Page 16 Wednesday, August 18, 2004 3:40 PM
