Canon imageRUNNER 1023, Service Manual

Page: 54 / 120

Chapter 7
3) Remove the two bosses [1], disconnect the
connector [2], and then slide the registration
sensor unit [3] toward you to remove it.
F-7-32
4) Remove the registration sensor [1] by releasing
the hook.
F-7-33
7.6.10 Registration Clutch
7.6.10.1 Removing the Registration Clutch
0013-1237
1) Detach the rear cover.
2) Remove the connector [1] and E-ring [2], and then
remove the registration clutch [3].
F-7-34
7.6.11 Feeding Roller
7.6.11.1 Removing the Cassete Feed
Roller
0013-1223
1) Remove the cassette.
2) Place the machine with the rear panel down.
However, since the exhaust duct projects about 16
mm from other area of the rear panel, insert stacks
of paper or the like under the rear panel so that the
machine stands stably.
3) While pressing the separation roller [1] to rele ase
the pressure, remove the boss [2] and slide the
feed roller upward until the shafts [3] are
separated.
4) Pull out the feed roller [4] to remove it.
[2] [3]
[1]
[1]
[3]
[1] [2]
[2]