Canon imageRUNNER 1023, Service Manual

Page: 21 / 120

Chapter 2
2. Installation of a card reader
1) Remove the screw [1] from the card reader.
F-2-7
MEMO:
The removed screw will be used later.
2) Remove the screw [1] securing the ground cable,
and then separate the card reader [3] from the card
reader mount [2].
F-2-8
When removing the harness [1] through the opening
in the card reader mount, take care not to cut or
damage it.
F-2-9
MEMO:
The removed card reader mount is no longer
necessary.
3) Insert the card reader [2] harness and ground cable
into the hole in the supplied card reader mount [1].
Using the screw [3] removed in step 1) of "2.
Installation of the card reader", secure the card
reader to the card reader mount.
When inserting the card reader [2] harness and
ground cable into the hole in the supplied card reader
mount [1], take care not to cut or damage them.
[1]
[2]
[1]
[3]
[1]
[1]
[3]
[2]