Canon imageRUNNER 1019 Series, Basic Operation Manual

Page: 215 / 262

14-18
Mach
ine Settings
5. DIALING LINE CHCK Sets whether to check the telephone line condition.
– OFF
– ON
3. RX SETTINGS Sets the reception features.
1. ECM RX Sets whether the ECM (Error Correction Mode) reception is
activated.
– ON
– OFF
2. RX MODE Selects the receive mode. (See “Set the Machine for
Receiving Faxes,” in the Quick Start Guide.)
– FaxOnly
– FaxTel
– AnsMode
– DRPD
– Manual
3. FAX/TEL OPT. SET Sets the optional items in the <FaxTel> mode. (See
Chapter 1, “Advanced Send Features,” in the Advanced
Operation Guide.)
1. RING START
TIME
Sets the time the machine takes to check whether a call is a
fax or a voice call. (0SEC–30SEC)
2. F/T RING TIME Selects the ring length for voice calls. (15SEC–300SEC)
3. F/T SWITCH
ACTION
Selects whether the machine switches to the receive mode
after the ring time has elapsed, or whether if disconnects the
call.
– RECEIVE
– DISCONNECT
TX/RX SETTINGS