manualshive.com logo in svg

Canon imagePROGRAF TX-4100, Online Manual

The Canon imagePROGRAF TX-4100 is a cutting-edge large format printer designed for professional printing needs. Its user manual, available as a free download, provides comprehensive instructions and troubleshooting tips. Access the online manual on manualshive.com to optimize your printing experience and maximize the potential of this state-of-the-art device.

Share
Download
background image

Adjusting Line Length

To ensure that lines in CAD drawings are printed at exactly the right length, use 

Adjust feed length

 to

adjust the amount that paper is advanced.

There are two options in 

Adjust feed length

 : 

Print alignment pattern

 and 

Change adjustment values

.

Note

• We recommend executing the adjustment if you have changed the paper type or paper size.
• Always check the 

Set priority

 values before adjustment.

•

Selecting Feed Amount Adjustment Method

Items to Prepare

When Using Rolls

• An unused roll at least 254.0 mm (10.00 in) wide
• High-precision ruler

When Using Sheets

• One sheet of unused paper of at least A4/Letter size
• High-precision ruler

Follow the procedure below to adjust.

1.

Load paper.

1.

Loading the Upper Roll on the Printer
Loading the Lower Roll on the Roll Unit (Option)
Loading Sheets in the Printer

Important

• Always make sure the loaded paper matches the type of paper specified.

•

Adjustment cannot be completed correctly unless the loaded paper matches the settings.

2.

Flick HOME screen and tap 

 

Maintenance

.

2.

Home Screen Menu Composition

3.

Tap 

Paper feed adjustment

.

3.

4.

Tap 

Adjust feed length

.

4.

5.

Tap 

Print alignment pattern

 or 

Change adjustment values

.

5.

• If you tap 

Print alignment pattern

:

•

The test pattern is printed for you to measure the scale and calculate the discrepancy.

The scale bar prints "Millimeter" in 50 mm increments and "Inch" in 1-inch increments.

438

Summary of Contents for imagePROGRAF TX-4100













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for imagePROGRAF TX-4100

Brands by name

Popular brands

Load more brands