Canon imagePROGRAF IPF9100, User Manual

Page: 198 / 812

Handling rolls
Removing the Roll from the Printer
Caution
•
If you have activated automatic detection of the remaining roll paper, always follow the steps below to
remove rolls. You will be unable to manage the amount of roll paper left if you move the Release Lever
and remove the roll before the barcode is printed.
1.
Press the Load/Eject button.
A conrmation message is displayed regarding removal of the roll.
2.
Press the OK button.
The roll can now be removed.
Note
•
If you need to cut the roll, execute Paper Cutting on the Control Panel. (→P.191)
•
To have a barcode indicating the remaining roll paper printed on the edge of the roll paper, specify
On in Chk Remain.Roll in the Media Menu and Automatic in the Cutting Mode setting in Paper
Details .
If the document is not cut but kept in the printer, only the text message is printed. In this case,
cut the roll with scissors and remove the sheet.
3.
Open the Top Cover and lift the Ejection Guide.
184 Handling Paper