Canon imagePROGRAF iPF825 MFP Basic Guide No.1, User Manual, Page: 660 / 956

2.
Press ▲ or ▼ to select Media Menu , and then press the
▶
button.
3.
Press ▲ or ▼ to select Roll1(Uppr)Lngth or Roll2(Lwr) Lngth , and then press the
▶
button.
4.
Press ▲ or ▼ to select the length of paper loaded in the printer, and then press the OK button.
Specify the roll length as follows.
1.
Press
◀
or
▶
to move the cursor (_) to each field for entering numbers.
2.
Press the ▲ or ▼ button to enter the value.
3.
Repeat steps 1 and 2 to finish entering the value, and then press the OK button.
5.
Press the Online button to bring the printer online.
Removing the Roll from the Printer
Remove rolls from the printer as follows.
Note
• If the Wheeled Output Stacker is installed, remove it in advance.
(See " Using the Wheeled Output Stack-
er .")
→P.671
• If you need to cut a printed roll, select Paper Cutting in the printer menu and cut the roll at the desired
position.
(See " Specifying the Cutting Method for Rolls .")
→P.654
• If you have selected Media Menu > ManageRemainRoll > On in the printer menu, a barcode indicating the
amount of paper left is printed on the leading edge of the roll. However, barcodes are not printed on some
types of paper, and only a text message indicating paper information is printed.
Caution
• If you have activated automatic monitoring of the remaining roll paper, do not remove the roll before the
barcode is printed. You will be unable to keep track of the amount of roll paper left.
Handling Paper > Handling rolls >
Removing the Roll from the Printer iPF825
7
644