Canon ImagePress C700 Service Manual Download Page 60

Page: 60 / 132

Canon

Canon imagePRESS C800/C700 Service Guide

Note:

•

This process is available for the imagePRESS C800/C700 with the
imagePRESS Printer Kit or the imagePRESS Server attached.

•

This process is not to be confused with the process to back up or restore
RAM Data.

Firmware Upgrade

1. Computer Requirements for Upgrading

The following are the recommended Desktop PC or laptop
specifications

to download the firmware are:

•

CPU: Celeron 400 MHz or higher (32-bit processor only)

•

Memory: 512 MB of RAM or more

•

Free HDD Capacity: 1 GB or more of available hard disk space.
(Available disk size depends on the firmware in question and the size
of backup data.)

•

Access to e-Support via the internet: Firmware is available for
download from e-Support.

•

CD-ROM Drive with write capability (optional): A CD-ROM drive is
not required since the firmware can be downloaded from e-Support to
a PC. However, a copy of the firmware can be written to a CD for the
Dealer Library.

•

High-Speed USB 2.0 (recommended) or 1.1

•

Display: VGA 640 x 480 resolution or better, 256 colors or more

•

Operating System (any of the following):

Microsoft Windows 2000 Server/Professional

Microsoft Windows XP Professional or Home Edition

•

Network connection: 10Base-T/100Base-TX, or a PCMCIA slot for an
Ethernet card

•

Download Tool: SST version 4.72 or later

•

Necessary Cables:

High-Speed USB 2.0-compliant cable (as short as possible to
avoid connection problems).

Note:

Do not use extension cables.

Cross-over Ethernet cable: twisted pair cross cable (in the case
of 100Base-Tx, Category 5 or higher)

47 Specifications are subject to change without notice.

Canon imagePRESS C800/C700 Service Guide

October 2014

Revision 2

Page 54

Summary of Contents for ImagePress C700





































































































































Search results

Summary of Contents for ImagePress C700

Reviews:

Related manuals for ImagePress C700

Brands by name

Popular brands

Canon ImagePress C700, Service Manual

Search results

Summary of Contents for ImagePress C700

Reviews:

Related manuals for ImagePress C700

Brands by name

Popular brands