![background image](http://html.mh-extra.com/html/canon/imageformula-scanfront-400/imageformula-scanfront-400_set-up-and-operation-manual_63007037.webp)
Chapter 3 Handling
37
❏
Business Card
Size
Width: 1.97" (50 mm) and above
Length: 3.35" (85 mm) and above
Thickness
101.33 lb Cover (380 g/m
2
) and below
IMPORTANT
• We recommend placing business cards horizontally. Vertically
placed business cards may not feed properly depending on
their size.
• If the stack of business cards that you placed is not fed
properly, reduce the number business cards.
• Business cards may sometimes be stacked in the wrong order
when they are ejected, depending on the size and thickness
of the business cards, and the orientation that they are loaded.
❏
Card (plastic)
Size
2.12" x 3.37" (54 mm x 86 mm) (ISO standard)
Card thickness
0.055" (1.4 mm) or smaller
Orientation
Horizontal feeding only
Embossed cards
Embossed cards can be scanned.
Loading capacity
10 cards (non-embossed), 1 card (embossed)
CAUTION
• When scanning cards, place them to be fed horizontally. If you
place cards to be fed vertically, they may not be ejected
properly, and cards that get jammed may be damaged when
you remove them.
• Embossed cards may not be able to be scanned correctly,
depending on the type of embossment.
• When scanning cards, set [Double feed detection by
Ultrasonic] to [OFF] in the Detailed Settings screen. (Refer to
p. 89 of the
❏
Passport
Size
3.46" × 4.92" (88 mm × 125 mm) (ISO standard)
Insert the passport into an optional carrier sheet
(passport type) in an opened state.
Thickness
0.236" (6 mm) or less (including carrier sheet)
Summary of Contents for imageFORMULA ScanFront 400
