background image

36

Chapter 3

Using the Software

About the Software

The following software applications are provided on the setup disc that is
packaged with the scanner. Be sure to open and read the Readme.txt file on the
setup disc before installing the software.

ISIS/TWAIN driver

This driver allows the scanner to use ISIS (Image and Scanner Interface
Specification) compatible applications or TWAIN (Tool Without An Interesting
Name) compatible applications to scan documents. Be sure to install the ISIS/
TWAIN driver to use this scanner.

CapturePerfect

This is a TWAIN compatible application for scanning images. Install it if
necessary.

Job Registration Tool

Job Registration Tool is a TWAIN-compliant application for registering the jobs
used by the Job function. Note, however, that the Job function is not supported
on a computer that is running Windows NT. If you want to use the Job function,
run the scanner with a computer running a supported operating system other
than Windows NT. (See “Job Function,” on p. 20.)

CapturePerfect and the Job Registration Tool use the TWAIN Driver. Be sure to install

the ISIS/TWAIN Driver before you install CapturePerfect or the Job Registration Tool.

The ISIS/TWAIN driver provided with the scanner does not necessarily operate all

ISIS compatible applications or all TWAIN compatible applications. Contact your

sales representative for further information.

Some functions mentioned in this manual may not operate in some applications.

Important

Summary of Contents for ImageFormula DR-7080C

















































































































Reviews: