![background image](http://html.mh-extra.com/html/canon/imageformula-dr-2050sp/imageformula-dr-2050sp_user-manual_62936019.webp)
16
Setting up the Scanner
Connecting the Scanner to the Projector
Before connecting the liquid crystal projector, make sure the scanner is not
connected to a PC. The presentation mode cannot be used while the scanner is
connected to a PC.
1.
Make sure the power of the scanner and liquid crystal projector is set to
OFF.
2.
Connect one end of the RGB (Red, Green, Blue) cable (D-sub, 15-pin)
provided with the scanner to the RGB connector of the scanner and
connect the other end to the liquid crystal projector
a
.
3.
Connect the AC adapter plug to the power connector of the scanner
b
.
4.
Connect the plug of the power cable to the AC adapter
c
.
5.
Connect the power plug into the electrical outlet.
d
Note
The scanner is automatically set to the “Scanning mode” when it is connected
to a PC. Be sure to disconnect the USB cable connecting the scanner to the PC
in order to use the scanner in the Presentation mode.
Summary of Contents for imageFORMULA DR-2050SP
