background image

35

Placing Documents

Note the following points when placing documents on the scanner.

• Place the front of the document toward you.
• A maximum of 50 documents or a document stack no higher than 

5 mm (0.2") can be loaded at one time.

• Move the stopper to the edge of the document in the document 

tray in accordance with the document. Otherwise, this may 
cause a paper eject error.

• When scanning multiple documents, sort them into batches of 

uniform paper quality and thickness and load each batch 
separately. Note that loading mixed batches may cause paper 
jams.

• When scanning relatively thick (0.15 mm to 0.2 mm (0.005" to 

0.008") documents, the feeding process may cause the 
document to curl and cause paper jams at the document feed 
opening. For such documents, load no more than 10 sheets at 
one time.

IMPORTANT

Align the documents and set the bottom of the documents level in the 
document tray.

This section describes how to load and scan documents.

CAUTION

• Avoid wearing loose fitting clothing, dangling jewelry, long ties, 

or long hair that could become entangled with moving parts, 
especially the rollers that feed paper through the scanner. If such 
objects become entangled, immediately disconnect the power 
plug from the power outlet.

• Check the paper stack and remove all clips, staples, pins, or any 

other type of metal or plastic fastener. These objects may cause 
damage to the document, a paper jam, or a scanner malfunction.

• Do not touch documents that are being fed under any 

circumstances. The documents that are being fed may cut your 
hand.

Document Feeding and Scanning

Summary of Contents for imageFORMULA CR-80



























































Reviews: