background image

5

Important Safety Instructions

Handling

WARNING

Never install and operate the scanner near flammable substances, 
such as alcohol, paint thinner, benzene, or any other type of volatile 
solution.

Never damage or modify the power cord, and never place heavy 
objects on the power cord.

Always make sure that your hands are dry when you are handling 
the power cord or power plug. Never grasp the power plug when 
your hands are wet.

Never plug the scanner into a multiplug power strip.

Never bundle, wrap, or tie the power cord around itself or another 
object. Connect the power plug securely into the power outlet.

Use only the power cord and power plug provided with the scanner.

Never attempt to disassemble or modify the scanner.

Never use flammable aerosol products near the scanner.

Before you clean the scanner, turn the power OFF and disconnect 
the power cord from the power outlet.

To clean the scanner’s exterior, use a firmly wrung cloth, moistened 
slightly with water or mild detergent. Never use any type of volatile 
solution, such as alcohol, benzene or paint thinner.

If you hear strange sounds, detect smoke or abnormal heat, sense 
vibration, or smell odd odors around the scanner, turn OFF the 
power switch immediately and disconnect the power cord from the 
power outlet. Contact your local authorized Canon dealer or service 
representative to have the scanner serviced.

Handle the scanner with care. Avoid shock and vibration to the 
scanner caused by reckless handling. If you suspect the scanner 
has been accidentally damaged, turn OFF the power switch 
immediately and disconnect the power cord from the power outlet. 
Contact your local authorized Canon dealer or service 
representative to have the scanner serviced.

Before you move the scanner, always turn OFF the power and 
disconnect the power cord from the power outlet.

CAUTION

To avoid damage to the scanner, never place the scanner on an 
unstable or vibrating surface. The scanner may tip or fall over, 
causing injury.

To avoid overheating and causing a fire, never block the air vents 
on the back of the scanner.

Keep all liquids, beverages, or any type of liquid, and clips, staples, 
necklaces, or other metal objects away from the scanner. If you 
accidentally spill liquid or drop a metal object into the scanner, turn 
OFF the power immediately and disconnect the power cord from 
the power outlet. Contact your local authorized Canon dealer or 
service representative to have the scanner serviced.

Never install the scanner in humid or dusty locations. Doing so may 
cause a fire or electrical shock.

Never place heavy objects on top of the scanner, as these objects 
may tip or fall over, and cause injury.

When you remove the power cord, grip it by the power plug head. 
Never attempt to disconnect the power cord from the power outlet 
by pulling on the power cord. Doing so may damage or expose the 
cord’s internal wiring, and cause a fire or electrical shock.

Keep the area around the power outlet clear of all obstacles so you 
can disconnect the power cord easily at all times.

Never spill water or volatile solutions (alcohol, benzene, paint 
thinner) into the scanner. Doing so may cause a fire or electrical 
shock.

When the scanner is not being used for a long period of time, 
disconnect the power cord from the power outlet.

Avoid wearing loose fitting clothing, dangling jewelry, long ties, or 
long hair that could become entangled with moving parts, especially 
the rollers that feed paper into the scanner. If such objects become 
entangled, immediately disconnect the power plug from the power 
outlet to stop the scanner.

Be careful when you are loading a document or clearing a paper 
jam. It is possible that the paper edges may cut your fingers.

Do not open the Maintenance Cover while the scanner is operating. 
Doing so may result in a malfunction or injury.

Do not touch the pins and contacts on the scanner’s connector with 
your hands. Doing so may result in a malfunction.

Do not touch anything except the operation buttons when the jogger 
is operating or documents are being fed.

Summary of Contents for imageFORMULA CR-190i




















Reviews: