background image

7

Envelope

You can also scan the envelope. When using separation OFF mode, 
you can scan an envelope with thickness up to 0.02" (0.5 mm) or 
weight up to 111 lb bond (413 g/m

2

).

NOTE

• Disable the double feed detection function. (See “Using Ultrasonic 

Double Feed Detection,” on p. 33 in Instructions.)

• If the envelope is not the first document in the batch, it may cause 

a feeding error or a paper jam.

• Some type of envelope may cause a feeding error or a paper jam.

Placing Documents

Note the following points when placing documents on the scanner.

• Place the front of the document toward you.
• Do not exceed the Load Limit Mark when placing documents in 

the document tray. This may cause feeding errors or paper 
jams.

• A maximum of 250 documents can be loaded at one time.
• Move the stopper to the edge of the document in the document 

tray in accordance with the document. Otherwise, this may 
cause a paper eject error.

• Additional documents can be placed while the machine is 

scanning.

IMPORTANT

• Align the documents and set the bottom of the documents level in 

the document tray.

• Do not exceed the Load Limit Mark when placing documents. This 

may cause double feed error.

Load Limit Mark

Stopper

Summary of Contents for imageFORMULA CR-135i High-Volu
































Reviews: