Canon imageCLASS MPC190 Basic Manual Download Page 9 | Manualshive

Page: 9 / 91

Canon imageCLASS MPC190 Basic Manual Download Page 9

Preface

IX

Handling

• Use only the power cord that came with the machine.
• Turn off the power and unplug the machine in the following conditions:

– When the power cord or plug is damaged or frayed.
– If liquid has spilled into the machine.
– If the machine has been exposed to rain or water.
– If the machine does not operate normally when you have followed the instructions in the guides

included with your machine. Adjust only those controls that are covered by the instructions in the
guides since improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to normal operation.

– If the machine has been dropped or damaged.
– If the machine exhibits a distinct change in performance, indicating a need for servicing.

WARNING

• Do not drop paper clips, staples, or other metal objects

inside the machine. Also do not spill water, liquid, or
flammable substances inside the machine. If these items
come into contact with high-voltage parts inside the
machine, it may result in fire or electrical shock. If these
items are dropped or spilled in the machine, turn off the
power and unplug the power cord immediately with dry
hands. Then contact your local authorised Canon dealer
or the Canon help line.

• Do not use any highly flammable sprays near the

machine. If gas from a spray comes into contact with the
electrical components inside the machine, it will result
in fire.

• There are high-voltage components inside the machine.

If you are looking inside the machine to remove paper
jams etc., do not allow metallic objects such as jewellery
to come into contact with the inside of the machine.
Contact may result in burns or electrical shock.

CAUTION

• Close the document cover gently to avoid catching your

hand. Failing to do so may result in injury.

• Do not press down hard on the document cover when

using the platen glass to scan thick books. This may
damage the platen glass and document cover,
and/or result in injury.

«
...
7
8
9
10
11
...
»

Summary of Contents for imageCLASS MPC190




























































































Reviews:

No comments