manualshive.com logo in svg

Canon imageCLASS MPC190, Basic Manual, Page: 72 / 91

Share
Download
Canon imageCLASS MPC190 Basic Manual Download Page 72

9-10

Troubleshooting

Chapter 9

If there are repeated paper jams

Paying attention to the following points, reload the paper.

1. Fan out the sheets of paper well so that they do not stick together.
2. Align the edges of the paper.
3. Adjust the paper guide correctly.
4. Make sure the paper stack does not exceed the paper limit mark (

|

t

).

5. Make sure the paper loaded does not exceed the capacity of the multi-purpose tray 

(

 p. 3-1).

6. Do not force paper into the multi-purpose tray.
7. Only use the same type of paper.
8. Use recommended print media (

 p. 3-1).

If the nozzle check pattern does not print properly

Refer to 

Maintaining the printhead

, p. 8-5.

Interpreting the messages

When the Alarm light blinks

Check the message in the LCD. If there is a message, follow the instructions and correct the 
error. 
To resume operation, press [Resume]. The Alarm light will turn off.
If the error remains, turn off the machine and disconnect the power cord. Wait 15 seconds, then 
reconnect the power cord and turn on the power. 

If you cannot clear a paper jam

Turn off the machine and disconnect the power cord. Wait five seconds, reconnect the power 
cord and turn on the power. If the problem has been resolved, the Alarm light will turn off.

If the Alarm light still lights even after you have turned the power on again

Contact your local authorised Canon dealer or the Canon help line.

4

Press [Resume].

• If you are printing from a Windows application, 

follow the instructions displayed on your 
computer.

Summary of Contents for imageCLASS MPC190




























































































Reviews:

No comments