Canon imageCLASS MF5600 Series, Service Manual

Page: 201 / 256

Chapter 5
5-7
5.5 Error Code
5.5.1 Outline
5.5.1.1
Error Code Outline
0006-6127
An error code is used to indicate a fault in a machine, and is indicated in the machine's LCD or reports, showing the
nature (symptoms) of the fault. Using the error code, the user or the service man can readily find out how to correct
the fault by simply referring to the User's Manual or service manual.
An error code may be either of the following two types:
User Error Codes
A fault indicated as a user error code is one that can easily be corrected by the user, as by operating the machine.
It takes the form of "#+number."
Service Error Codes
If a fault calls for a service man for correction, it is indicated as a service man error code in the form of
"##+number" or "SYSTEM ERROR E+number."
Memo
A service error code expressed in the form of "##+number" will not appear on the LCD, Error Tx Report, or
Activity Report while the machine remains in factory default state. To check a service error code, shift bit 0
of service soft switch #1 SSSW SW01 to '1'.
Memo
Display only the error codes which are newly incorporated in this machine as well as which require remedies
unique to the product. For the causes and countermeasures of other error codes, refer to the separate G3/G4
Facsimile Error Code List (Rev. 2).
5.5.2
User Error Code
5.5.2.1
Unique Remedies User Error Codes
0007-2925
T-5-3
No. Tx or Rx Definition
#001 [TX] Document has jamed
#003 [TX/RX] Document is too long, or page time-over
#005 [TX/RX] Initial identification (T0/T1) time-over
#009 [RX] Recording paper has jammed or the recording paper has run
out