Canon imageCLASS MF5600 Series, Service Manual

Page: 144 / 256

Chapter 3
3-88
3.5.5.12
Removing the Tooth-
Missing Gear
0005-4219
1) Remove the 2 screws [1], and detach the gear
support [2].
F-3-380
2) Remove the spring [1].
3) While freeing the claw, detach the tooth-missing
gear [2].
F-3-381
3.5.5.13 Removing the Power
Supply Shield Plate
0002-7816
1) Remove the five screws [1] to remove the power
supply shield plate [2].
F-3-382
3.5.5.14
Removing the Power
Supply Assembly
0006-3694
1) Remove the connector [1] and remove the cable
from the cable guide.
F-3-383
2) Remove the three screws [1]. (The external cover is
omitted from the illustration below to show the
instructions clearly.)
3) Remove the four connectors [2] as well as the flat
cable [3] on the DCNT board.
F-3-384
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[1]
[2]
[2]
[1]
[3]