Canon IMAGECLASS MF4150 Basic Manual Download Page 126

Page: 126 / 175

10-19

Maint

enance

Transporting the Machine

Follow this procedure to avoid
vibration damage to the machine when
transporting it over a long distance.

Turn off the main power switch.

Disconnect the power cord and
all the cables from the back of
the machine.

Lift the scanning platform until it
is locked (A), and open the
printer cover (B).

Remove the toner cartridge.

CAUTION

– To avoid exposing the toner cartridge to

light, place it in its protective bag or
wrap it in a thick cloth.

– Do not open the drum protective shutter

on the toner cartridge. Print quality may
deteriorate if the drum surface is
exposed to light or is damaged.

NOTE

Always hold the toner cartridge by its
handle.

Close the printer cover and
lower the scanning platform.

CAUTION

Be careful not to get your fingers caught.

Summary of Contents for IMAGECLASS MF4150
















































































































































































Search results

Summary of Contents for IMAGECLASS MF4150

Reviews:

Related manuals for IMAGECLASS MF4150

Brands by name

Popular brands

Canon IMAGECLASS MF4150, Basic Manual

Search results

Summary of Contents for IMAGECLASS MF4150

Reviews:

Related manuals for IMAGECLASS MF4150

Brands by name

Popular brands